Create safety with light in the city floor
Create safety and atmosphere with light in the city floor. LED marker nails are used to delineate parking bays, separate pedestrian and cycle paths and mark discretion lines. They can also be used for purely decorative purposes.
The marking seams are fully moulded, making them extremely robust and able to withstand heavy vehicle loads without deformation. They are available in several sizes and three materials: bronze, stainless steel and cast iron.
The built-in LED ensures visible marking, even in the dark. The diode is a 0.15 watt DC diode that is supplied with 12 volts.
Installation is simple and there are guidelines for correct installation. The power supply can be flexibly integrated into the given project and individual diodes can be replaced without removing the marking seam.
Marking nails in sizes from Ø26 to Ø150 mm are glued to paving stones and the diodes are connected to a common transformer.
Item number
No SKU available
Material
Untreated cast iron, Bronze, Stainless steel
Dimension
Ø150 mm, Ø100 mm, Ø50 mm, Ø26 mm
Assembly
Installation is simple and there are guidelines for correct installation. The power supply can be flexibly integrated into the given project.
Additional information
The marking seams are fully moulded and do not deform under load. The cast iron is of the highest quality GGG40.
Create safety and atmosphere with light in the city floor. LED marker nails are used to delineate parking bays, separate pedestrian and cycle paths and mark discretion lines. They can also be used for purely decorative purposes.
The marking seams are fully moulded, making them extremely robust and able to withstand heavy vehicle loads without deformation. They are available in several sizes and three materials: bronze, stainless steel and cast iron.
The built-in LED ensures visible marking, even in the dark. The diode is a 0.15 watt DC diode that is supplied with 12 volts.
Installation is simple and there are guidelines for correct installation. The power supply can be flexibly integrated into the given project and individual diodes can be replaced without removing the marking seam.
Marking nails in sizes from Ø26 to Ø150 mm are glued to paving stones and the diodes are connected to a common transformer.
No data available
Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque omnis iste natus error sit voluptatem laudantium.
