Monier / 4, 6, 9 and 12-pane roof windows
Dantegl, hand-laid wing roof tiles for JP trusses. A Dantegl, JP1 and JP2 hand-laid wing roof tile is unique. Each tile is unique and therefore creates a very special effect on the roof.
BMI Monier is the only supplier in the Nordic region to offer hand-finished roof tiles made from deep-rooted traditions dating back more than 1000 years.
This roof window is produced in standard sizes 4, 6, 9 and 12-pin.
Item number
No SKU available
Material
Treated cast iron / RAL 7021 Light Pearl. A weather resistant paint C4 High.
Dimension
4-pin, 6-pin, 9-pin, 12-pin
Optional extras
Motor (Control box can control 4 windows), Remote control, Wind and rain sensor sold separately.
Additional information
Gas springs are recommended for 9-pane and 12-pane windows. They facilitate opening and closing of the large heavy frames and are not visually dominant.
Dantegl, hand-laid wing roof tiles for JP trusses. A Dantegl, JP1 and JP2 hand-laid wing roof tile is unique. Each tile is unique and therefore creates a very special effect on the roof.
BMI Monier is the only supplier in the Nordic region to offer hand-finished roof tiles made from deep-rooted traditions dating back more than 1000 years.
This roof window is produced in standard sizes 4, 6, 9 and 12-pin.
4-pillar roof window
A 4-paned roof window refers to how many tiles the window takes up in the roof cladding.
The roof window will have dimensions corresponding to 4 roof tiles - 2 in width and 2 in height.
Roof windows for slate, for example, will have dimensions corresponding to the module dimension close to 4 slate tiles. Minor customisation may occur.
Rungs / Standard
Cross bars: One vertical and one horizontal bar / four panes
Second rung division
One vertical rung
No glazing bars / one pane
Data
Light opening, frame: 227 x 389 mm
U-value: 1.8 W/m²K
6-pin roof window
A 6-paned roof window refers to how many tiles the window takes up in the roof cladding.
Roof windows will have dimensions corresponding to 6 roof tiles - 3 in width and 2 in height.
The roof window for slate, for example, will have dimensions corresponding to the module dimension close to 6 slate tiles. Minor customisation may occur.
Rungs / Standard
Cross bars: One vertical and one horizontal bar / four panes
Second rung division
One vertical rung
No glazing bars / one pane
Data
Light opening, frame: 416 x 426 mm
U-value: 1.8 W/m²K
9-pin roof window
A 9-pane roof window refers to how many tiles the window takes up in the roof cladding.
The roof window will have dimensions corresponding to 9 roof tiles - 3 in width and 3 in height.
Roof windows for slate, for example, will have dimensions corresponding to the module dimension close to 9 slate tiles. Minor customisation may occur.
Rungs / Standard
Cross bars: One vertical and two horizontal bars / six panes
Second rung division
One vertical rung
No glazing bars / one pane
Data
Light opening, frame: 416 x 735 mm
U-value: 1.7 W/m²Kt
12-pin roof window
A 12-pane roof window refers to how many tiles the window fills the roof cladding.
The roof window will have dimensions corresponding to 12 roof tiles - 4 in width and 3 in height.
Roof windows for slate, for example, will have dimensions corresponding to the module dimension close to 12 slate tiles. Minor customisation may occur.
Rungs / Standard
Cross bars: Two vertical and two horizontal bars / nine panes
Second rung division
One vertical rung
No glazing bars / one pane
Data
Light opening, frame: 622 x 733 mm
U-value: 1.6 W/m²K
If a rescue opening is required, an exemption must be applied for.
GH Form is happy to enter into dialogue with information about the application.
